PHOTOGRAPHY AND VIDEO SLIDER MOTOR 600 MM PRSA600 S400100

Photos and videos With this motorized slider 60 centimeters is possible traveling videos with high quality and time lapse photography in a very simple way. It supports both still cameras and video up to 5 kg and works perfectly horizontally and vertically. With its rail 16 mm in diameter and their skates without lubrication very smooth, precise and vibration movements are obtained. Its minimalist design and the absence of cables facilitate transport and assembly anywhere, winning ergonomics to put the control of speed and direction in the same car where the camera goes.

The angle you choose it Thanks to the rigidity and strength of the rail is possible to mount the camera in a vertical, horizontal or even sloping to always get the desired effect your pictures and videos. With the help of a tripod you can place the camera completely vertical or inclined as much as needed. You can also use the slider by placing one end of the rail on a table and the other on a tripod, or the two sides on a tripod or on a flat surface like a table or directly on the floor.

They multiply your chances engines When you buy your slider, you can choose between a motor slow movement with a speed of 9-90 mm ​​per minute, medium speed engine with a range of 56-560 mm per minute or the quick engine with a speed ranging from 168 to 1683 mm per minute. Also, change the engine slider is very simple and you can do it yourself in a couple of minutes. This way you can have one motorized rail and switch the motor according to the project needs to be addressing. With its low consumption, it is possible to feed the slider from any battery or battery pack with a voltage of between 9 and 16 V, 12V transformer also included.

The slider in perspective To ensure that the camera never left halfway, motorized rail slider is available in different sizes. Choose the length of the rail between 5 different sizes and use the slider on all types of projects, both video and photography. Carriles available from 60 cm to 180 useful travel. Analog slider 60 centimeters. Analog slider 90 centimeters. Analog slider 120 centimeters. Slider 150 centimeters analog. Analog slider 180 centimeters.

Limit switch On one side skate slider is a switch limit switch for the engine to stop automatically at the end of travel. This way you can leave the slider running and unattended in long-term projects without fear that the engine can be damaged.

Technical characteristics

Food :	9V to 16V. 300 mA
Slow Engine:	Maximum speed: 6.5 minutes Minimum speed: 65 minutes
Middle Engine:	Top speed: 1 minute Minimum speed: 10.6 minutes
Fast Engine:	Maximum speed: 21.3 segundoa Minimum speed: 3.9 minutes
Effective travel:	60 centimeters
Measures:	730 x 120 x 95 mm
Weight:	2.9 kg

Kit Contents

• Motorized Slider PRSA600.
• 12V feeder.
• 2 adapters 1/4 to 3/8.
• Instruction manual in PDF.

Share this: