31 October 2015
Ultrasonic sensor Housing Fixing
Ultrasonic distance sensor for Robonova 1 including a MaxSonar EZ1 sensor type servo cable and a specially machined faceplate to accommodate the sensor inside. The sensor used is based on the MaxSonar EZ1 ultrasonic sensor that stands out for its small size and low power consumption. The MaxSonar EZ1 sensor detects objects between 0 and 6.45 meters away, providing data from the calculation of the distance with a resolution of 1 inch (2.54 cm). The sensor is screwed into the inside of the front casing so included it is in the central part of the chest Robonova. The sensor includes a servo type cable connection to connect directly to the control circuit Robonova. The sensor housing and screws.
Subscribe to:
Post Comments
(
Atom
)
Post a Comment